Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Eurotherm 2704 Status Messages

Friday, March 24, 2017 8:33:00 AM America/New_York

Here’s an outline that describes the status messages for the Eurotherm 2704 Multi Loop Controller. These messages appear on the display to show the status of the controller.

Eurotherm 3216

Friday, March 17, 2017 8:26:00 AM America/New_York

The Eurotherm 3216 is Quick and easy commissioning - no need for expert knowledge. Clear information of process with scrolling, custom messages. Custom alarm messages for easy understanding. Recipe selection from operator interface. Internal timer and set point programming. Instant indication of heater faults with integral ammeter. Remote set point - solution for multi-zone applications.

The Eurotherm 3216 controller comes with many advanced features that are not available that are commonly available in similar controllers. It provides precision control of process variables like temperature.

Eurotherm 3204 Heat Current Monitoring

Friday, March 10, 2017 8:49:14 AM America/New_York

 

A current transformer input provides display of the heater current and a health check on the load. Partial load failure, heater open circuit and SSR faults are detected and displayed as scrolling alarm messages as well as providing an alarm output. A front panel ammeter displays the heater current on the 3204.

Two New Additional Products

Friday, March 3, 2017 8:12:34 AM America/New_York

The “EPACK-2PH” and “EPACK-3PH” has been added to the Power Control section of our Eurothermonline store. For those who wish to upgrade their furnaces or heating equipment from analog to digital SCRs, the EPack is the perfect solution for OEMs and End Users.

 

Eurotherm 3058

Friday, February 24, 2017 6:47:00 AM America/New_York

 

The 3508 large 5-digit display provides a clear and unambiguous indication of the process value. A four-line message centre provides custom or standard views of important information to the user while vertical and horizontal bargraphs provide at a glance visual indication of the process.

The Eurotherm 3508 is a 1/8 DIN process controller belonging to the most advanced range of products in this category. It offers precision control of a range of process variables, such as temperature. It has advanced features that offer great flexibility.

For configuring basic functions, including control options, alarms, sensor type, and measurement range a 'Quick Start' process can be used. The unit combines flexibility with ease of use. For configuring advanced features, users can use a PC based tool that allows them to select functions from a library.  

Ideal for:
Semi-conductors
Process applications
Reactors and Fermenters
Autoclaves
Environmental chambers
Melt pressure
Heat Treatment

Features:
Precision PV input
Math/logic/timers
Modbus RTU
Recipes
50 Programs
Carbon potential
Ethernet Modbus TCP
2 PID loops
Custom user interface
Profibus DPDeviceNet network

Eurotherm Mini 8 Controller

Friday, February 17, 2017 6:41:00 AM America/New_York

"The Mini8 controller is an ideal partner to a programmable logic controller. Able to multi-drop on either Serial, Fieldbus or Ethernet communications. It offers a cost-effective alternative to performing analogue measurement or loop control in a PLC." The Mini8 Controller, a very competitive and compact data acquisition device, offers high performance control usually only found in Eurotherm panel mount PID controllers.

Its modular design enables its I/O and feature set to be selected to meet a wide range of applications from simple to complex.

The ideal partner to a programmable logic controller (PLC) is the Mini8 controller. It can multi-drop on either serial, Ethernet or Fieldbus communications and it offers a real, cost-effective alternative to performing loop control or analog measurement in a PLC.

By implementing these functions in the Mini8 controller hardware cost is reduced, relieving the PLC of the burden of performing analog functions - often allowing a lower specification processor to be used.

The feature set of the Mini8 controller includes graphical wiring, high performance PID control, and set-point programming functions together with logic, math and timing function blocks.

When used in a data acquisition installation the high density analog I/O can be combined with paperless graphic recorder products, like the Nanodac to provide unsurpassed local and network access to your process.

Eurotherm NANODAC

Friday, February 10, 2017 6:27:00 AM America/New_York

 

The Eurotherm nanodac™ provides the ultimate in graphical recording combined with PID control and setpoint programs.
The compact ¼ DIN panel mount unit offers four high accuracy universal inputs for data recording and PID control. It is a secure data recording device with accurate control and is enhanced by a full color, ¼ VGA display which brings a crystal clear operator interface to even the smallest of machines.

YouTube video https://www.youtube.com/watch?v=ufDyyx9P7N4

PID Control Loops
The nanodac™ instrument can also provide two independent control loops (optional). This control functionality utilizes the advanced Eurotherm PID algorithm providing high performance and reliability to your process. It has one of the best auto-tunes facilities available along with overshoot inhibition (cutbacks); compensation for power fluctuations using power feedforward; linear, fan, oil and water cooling.

In the Heat Treatment processes set-points often need to vary control process over a set period of time. So this is achieved by using a set-point program.

The nanodac™ offers an optional Dual Programmer supporting up to 100 programs locally, each program supporting 25 segments.

The nanodac™ also provides remote access to a further 100 programs that can be easily retrieved via FTP or USB memory stick.

Ther display is crystal clear
The 3.5” TFT display offers incredibly clear visualization of process parameters with a wide selection of configurable views to best suit the application. You gave the following views: Numeric; Horizontal and vertical trends; Horizontal and vertical bar graphs; Alarm panel, Alarm status, and control loops. User wiring from the front of the product, provides for detailed configuration without the need to connect to a PC.

Wash down Front
An optional IP66 rated Wash-down bezel has been made available in this release, making the nanodac™ suitable for applications in Food & Beverage or CIP/SIP.

Server mode or EtherNET/IP Client
As an option the nanodac™ recorder/controller can be easily integrated with an existing instrument network, and act as local data historian. When enabled, EtherNet/IP allows the nanodac™ to act as either a Server or a Client, and (via virtual channels) provides data recording for up to 30 process parameters.

EtherNet/IP provides two user pages: the first is a diagnostics page that can be used during initial setup and commissioning, to test the connection, between the Client and or Server. The second is an overview of all the process parameters (data points) being addressed via the communications.

Data Recording and Acquisition
The nanodac™ recording functionality utilizes the secure strategies and UHH format developed by Eurotherm through years of recording expertise. As well as multiple real-time views and historical review on the product, multiple data archiving strategies are provided using the 50MB onboard Flash memory, removable USB and data transfer via FTP to a specified server.

The four universal input channels provide high accuracy (suitable for use in Nadcap applications) and 125ms parallel sampling. An additional 30 virtual channels can be utilized to provide math, counter, slave communications and totalizer functionality within the instrument.

3 x Isolated DC Outputs (DDD)
This release provides support for Isolated DC Outputs in option slots OP1, OP2 and OP3. Please refer to the Installation sheet or User Guide for wiring instructions. The Eurotherm nanodac™ provides the ultimate in graphical recording combined with PID control and setpoint programs.
The compact ¼ DIN panel mount unit offers four high accuracy universal inputs for data recording and PID control. It is a secure data recording device with accurate control and is enhanced by a full color, ¼ VGA display which brings a crystal clear operator interface to even the smallest of machines.

YouTube video https://www.youtube.com/watch?v=ufDyyx9P7N4

PID Control Loops
The nanodac™ instrument can also provide two independent control loops (optional). This control functionality utilizes the advanced Eurotherm PID algorithm providing high performance and reliability to your process. It has one of the best auto-tunes facilities available along with overshoot inhibition (cutbacks); compensation for power fluctuations using power feedforward; linear, fan, oil and water cooling.

In the Heat Treatment processes set-points often need to vary control process over a set period. So this is achieved by using a set-point program.

The nanodac™ offers an optional Dual Programmer supporting up to 100 programs locally, each program supporting 25 segments.

The nanodac™ also provides remote access to a further 100 programs that can be easily retrieved via FTP or USB memory stick.

Their display is crystal clear
The 3.5” TFT display offers incredibly clear visualization of process parameters with a wide selection of configurable views to best suit the application. You gave the following views: Numeric; Horizontal and vertical trends; Horizontal and vertical bar graphs; Alarm panel, Alarm status, and control loops. User wiring from the front of the product, provides for detailed configuration without the need to connect to a PC.

Wash down Front
An optional IP66 rated Wash-down bezel has been made available in this release, making the nanodac™ suitable for applications in Food & Beverage or CIP/SIP.

Server mode or EtherNET/IP Client
As an option the nanodac™ recorder/controller can be easily integrated with an existing instrument network, and act as local data historian. When enabled, EtherNet/IP allows the nanodac™ to act as either a Server or a Client, and (via virtual channels) provides data recording for up to 30 process parameters.

EtherNet/IP provides two user pages: the first is a diagnostics page that can be used during initial setup and commissioning, to test the connection, between the Client and or Server. The second is an overview of all the process parameters (data points) being addressed via the communications.

Data Recording and Acquisition
The nanodac™ recording functionality utilizes the secure strategies and UHH format developed by Eurotherm through years of recording expertise. As well as multiple real-time views and historical review on the product, multiple data archiving strategies are provided using the 50MB onboard Flash memory, removable USB and data transfer via FTP to a specified server.

The four universal input channels provide high accuracy (suitable for use in Nadcap applications) and 125ms parallel sampling. An additional 30 virtual channels can be utilized to provide math, counter, slave communications and totalizer functionality within the instrument.

3 x Isolated DC Outputs (DDD)
This release provides support for Isolated DC Outputs in option slots OP1, OP2 and OP3. Please refer to the Installation sheet or User Guide for wiring instructions.

PenGUIn™ machine-HMI (PG10)

Friday, February 3, 2017 6:10:32 AM America/New_York

The PG10 Operator Interface Terminal combines unique capabilities normally expected from high-end units but at a very affordable price. It is built around a high-performance core with integrated functionality. This core allows the PG10 to perform many of the normal features of the Paradigm range of Operator Interfaces while improving and adding new features.

The PG10 can communicate with many different types of hardware using high-speed RS232/422/485 communications ports and Ethernet 10 Base T/100 Base-TX communications. In addition, the PG10 features a USB port for fast downloads of configuration files and access to trending and data logging. A CompactFlash socket is also given so that Flash cards can be used to collect your trending and data logging information as well as to store larger configuration files.

In addition to accessing and controlling external resources, the PG10 allows a user to easily view and enter information. Users can enter data through the touchscreen or front panel 8-button keypad.

Eurotherm 2132i

Thursday, January 26, 2017 2:18:49 AM America/New_York

A universal input enables selection of nine internally stored thermocouple types and the PT100 resistance thermometer.  Linear inputs can be scaled to the desired display range. Two relay outputs are configurable for alarms. Three internal alarm setpoints are provided- configurable as high, low or deviation. Alarms can be 'blocked' on start-up to prevent unnecessary operator alerts.

The 1/32 DIN Eurotherm 2132i temperature and process controller comes with indication and alarming capabilities. Relay outputs can be used to implement over temperature furnace limits and other such process interlocks.

Fully configurable using operator interface
Alarm blocking on start-up
Simple operation
Reliable performance and accuracy
The PT100 resistance thermometer and nine thermocouples that are stored internally are available for selection with the universal input. Users can download other input linearizations. Based on the display range, linear inputs can be scaled accordingly.

There are three internal alarm set points that can be configured as deviation, high, or low alarms. Users can block the alarms on start-up to avoid unwanted alerts.

Users can expect positive operation with the presence of tactile buttons.

Based on the parameter the operator wants to see and adjust, the operator interface can be accordingly customized. Other parameters can be put under password protection.

Ideal for:
Plastics - extrusion
Heat treatment -small ovens
Sterilizers
Chillers
Trace heating
Heat sealing
 
Features:
Three internal alarm set points
Two configurable outputs
Universal input selection
Heater failure detection
Customized operator interface
Tactile buttons

Eurotherm 32h8i

Thursday, January 19, 2017 2:12:00 AM America/New_York

The Eurotherm 32h8i indicators offer accurate indication of temperature and process measurements. Process interlocks, including overtemperature furnace limits, are implemented using relay output channels.

It is all about how conveniently the device can be used. The user can configure every function based on the needs of the process with the 'Quick Start' code. Indications have to be defined to set process limits.

Eurotherm 32h8i indicator and others in the 3200i series precisely indicate process and temperature measurements. Relay output channels are used to implement over temperature furnace limits and other process interlocks.

Best for:
Weighing platform
Temperature & process indication
Plastics - extrusion melt pressure
Process protection
Level/pressure/flow
Heat treatment - furnace over temperature

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5